|
|
|
|
 |
 |
|
 |
18"
and 25" Shears Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a minimum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades. The Model 45 has a clear acrylic front safety guard to protect the operator, whilst at the same time making it possible to see the blades so that the material to be cut can be aligned accurately. The Model 45 (illustrated) has an 18" cutting capacity and the DM525 25". Both have imperial and metric edge scales and fully adjustable front and back stops for batch work. |
 |
DM 9000
and DM 9001 Two powerful, cost effective, shears which have the ability to accurately cut PCB laminates, plastics up to 2.00mm thick and aluminium up to 1.5mm. An important feature of these shears is safety. Free access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade. A safety latch is fitted to the pivot to prevent operation without it first being released. For positional accuracy the cutting bed is fitted with a rule which is recessed to assist in securing the PCB or sheeting whilst cutting is in progress. The DM9000 has a cutting capacity of 203mm (8") and is extremely compact with an overall height of only 575mm and a footprint of 335 X 140mm. It has a cutting bed of 110mm wide from the blade although wider material can be cut. The larger DM9001 will cut materials up to 305mm (12") and has a height of 670mm and a footprint of 440 x 245mm. It has a larger cutting bed 225mm wide from the blade although once again wider material can be cut. |
 |
Delight Supply Co.,Ltd. 128/109 Phayathai Plaza Building 9th Floor, Phayathai Road, Thung-Phayathai, Radthavee,
Bangkok 10400, Thailand |