RT100 Relay Tester Secondary Injection Relay Test Set
 
weis

RT100 Relay Tester Secondary Injection Relay Test Set
RT100 Relay Tester Secondary Injection Relay Test Set  

Introduction

Weis is a specialist company with over 20 years of experience in the commissioning, testing & maintenance of switchgear and power network fault monitoring within the Power Utility Industry.
The Relay Tester (RT100) is a Secondary Injection Test Set designed for the testing of protective relay equipment. This instrument is intended for use in high voltage substations and industrial environments.

Also available within our range of test equipment are a Circuit Breaker Timing Test Set (SA100 & SA100 ‘R’) and a Micro-Ohm Tester (MM100).

RT100 Relay Tester Secondary Injection Relay Test Set

The types of protection relay the portable relay test set (RT100) can be used to test include:

RT100 Relay Tester Secondary Injection Relay Test Set

Specifications

OUTPUTS
AC Current: 0 to 10A range with the following characteristics:-
 

No-Load Voltage (min.): 80V

Full-Load Voltage (min.): 70V

Full-Load Current (max.): 10A

Time: 2 hours

Safety: Output transformer equipped with built-in temperature protection.

Primary side protected by miniature circuit breakers.

RT100 Relay Tester Secondary Injection Relay Test Set

0 to 25A range with the following characteristics:-

No-Load Voltage (min.): 24V

Full-Load Voltage (min.): 20V

Full-Load Current (max.): 25A

Time: 1 hour

Safety: Output transformer equipped with built-in temperature protection.

Primary side protected by miniature circuit breakers.

0 to 50A (short term max. 200A peak) range with the following characteristics:-

No-Load Voltage (min.): 10V

Full-Load Voltage (min.): 2V

Full-Load Current (max.): 50A

Time: 1.5 minutes

Safety: Output transformer equipped with built-in temperature protection.

Primary side protected by miniature circuit breakers.

AC/DC Voltage: 0 to 240V AC rated at 2A for 1 hour.

0 to 300V DC rated at 2A for 1 hour.

Auxiliary Voltage: 240V AC rated at 0.5A.

240V AC rated at 0.5A. 110V DC rated at 0.5A, 110V AC rated at 0.5A & 30V DC rated at 1A.

If the 110V DC & AC fixed outputs are used simultaneously the rating is 0.2A each.

Safety (Voltage): Re-triggerable fuses used in all voltage outputs

INPUTS
Digital: 2 x wet contacts and 1 x dry contact.
TIMER
Range: 0.000 to 999.999 seconds, auto-ranging.
Resolution: 1mSec.
Max. Testing Time: 999.999 seconds.
MEASUREMENTS
Readout:

Output parameters are displayed on a large backlit LCD display.

Auto-ranging if output is less than 10% of range.

Measured Quantities:

AC current output.

Timer.

Accuracy: ±0.5% of metering.
AC Measurement: True RMS.
Set of Resistors: 0.5Ω (10A max.), 1Ω (5A max.), 25Ω (2A max.), 100Ω (0.7A max.) & 500Ω (0.3A max.).
OPERATING VOLTAGES RT100 Relay Tester Secondary Injection Relay Test Set
Prime Power: 230 or 115V AC ±15%, 50/60Hz.
ENVIRONMENTAL

Operating

Temperature:

-20ºC to +70ºC

Storage

Temperature:

-40ºC to +70ºC

MECHANICAL DETAILS
Weight: 10kg.
Carry Case: Reinforced aluminium, 13.5” x 9.5” x 6” (340mm x 240mm x 150mm).
DUE TO CONTINUING DEVELOPMENT AND IMPROVEMENTS WEIS RESERVES THE RIGHT TO CHANGE THIS SPECIFICATION WITHOUT NOTICE

Delight Supply Co.,Ltd. 128/109 Phayathai Plaza Building 9th Floor, Phayathai Road, Thung-Phayathai, Radthavee, Bangkok 10400, Thailand
Tel: 02-6129435-6 Fax: 02-612-9437 Email: sales@delightsupply.com