PCB PROCESSING EQUIPMENT
Mega Electronics 
   

Dry Film Roll Laminators

Dry Film Roll Laminators
A 350mm and 650mm dry film roll laminator for simple and effective laminating of rolls of Dry Film Photoresist to various substrates. The units are particularly useful for both printed circuit board production and the lamination of dry film to brass, steel etc for metal etching applications. Both sides of the substrate are simultaneously laminated. The machines use accurate controlled temperature and feed and automatically remove the polyofin separator sheet of the dry film.

Main features include:

  • Exclusive pre-set temperature and speed setting programs for a variety of applications just by Pressing a button on the digital display panel.
  • Adjustable override controls for both temperature and speed to compensate for variations in material or conditions.
  • Heater roller and pressure roller construction in silicon rubber allows roller gap adjustment ensuring correct pressure for panels up to 4 mm thick.
  • Function button displays actual roller temperature during operation.
  • Instant switch from Centigrade to Fahrenheit
  • Warm-up time only 10 minutes due to the Infrared heater design which gives better heat distribution and control.
  • Ready and Wait visual and audible signals alert operator to laminator readiness thus reducing errors.
  • 8 Bit microprocessor digital heat controller permits precise setting and guarantees fast response times.
  • Reverse function button allows easy film clear from the machine.
Max working width: 27-22800 model 340mm
27-22802 model 640mm
Temperature range: 0 - 160ºC
Lamination speeds: 0 - 1.6 metres/min variable in 10 stages
Power requirements: 220/240v 50/60Hz Single phase 12Amp
Shipping dimensions (mm): 27-22800 model 670W x 500H x 690L
27-22802 model 670W x 500H x1010L
Shipping weight: 27-22800 model 35 kilos
27-22802 model 49 kilos
A4 and A3 Dry Film Sheet Laminators
 For smaller volume production these Hot Roll Laminators enable the user to apply Dry Film Photo-Resist sheets to a wide range of materials, such as Copper PCB Laminates, Stainless Steel and Brass etc. For ‘one-off’ or very small scale production they offer an economical alternative to the Roll Laminators opposite. One side is laminated at a time to a thickness of 3mm thick. All temperature and speed controls are microprocessor controlled with a pre-set condition which can be manually overridden. Temperature and speed number (1-6) are indicated on the LCD display. Cold lamination is also possible.
A4 Laminator
Max Lamination Width: 235mm
Dimensions (mm): 545W x 270D x 130H
Weight: 11Kg
A3 Laminator
Max Lamination Width: 325mm
Dimensions (mm): 545W x 270D x 130H
Weight: 15Kg

Delight Supply Co.,Ltd. 128/109 Phayathai Plaza Building 9th Floor, Phayathai Road, Thung-Phayathai, Radthavee, Bangkok 10400, Thailand
Tel: 02-6129435-6 Fax: 02-612-9437 Email: sales@delightsupply.com